For the workbench where the production line is to be installed, we recommend that you do a good job of electrostatic grounding. Of course, this is also a very important step. If you do not do a good job of electrostatic grounding, it will not have an anti-static effect.

       The electrostatic grounding wire of the workbench must be set up auxiliaryly to avoid the inconvenience caused by modification. Of course, it is necessary to check whether static electricity can be released well after installation, so as to meet the installation requirements.To ground the workbench, it is necessary to connect a multi-stranded copper core cord with a cross-section of not less than 2m ㎡ to the configuration system, and check it after installation.
Reproduced Please indicate the source: http://www.hfjssj.com