How do you make a wooden cabinet?
       Before construction, check the quality of the fir fingerboard.
       Not only check the material, but also check whether the wall on which the cabinet is installed is perpendicular to the ground with a plumb hammer line.If the wall deviation is large, you need to ask the clay master to level the wall.Using the unified elevation line in the room, confirm the corresponding position according to the cabinet, cabinet elevation and upper and lower opening height required in the design and construction drawings, and use the ink line to pop up to show clearly.At this time, use an impact drill to drill the fixing hole of the stress point of the cabinet body and the wall, so as to facilitate the accurate position confirmation during installation.
According to the size of the design storage cabinet, draw the specific size with a woodworking pencil on the fingerboard, and then cut into different sized plates through the cutting machine to discharge neatly. Simply apply white glue when assembling the cabinet. In this way, the amount of glue applied will be moderate and fast. For reinforcement, the glue is applied at the junction of the plates. Fix it with twist nails to ensure the safety of the cabinet. Keep the spacing between each nail around 150mm.